Contamarce / Display / Panel - et@ bet@ Race e-commerce

SHOP
v.03.18
Vai ai contenuti

Contamarce / Display / Panel

GI Max Matrix
Contamarce / Display
The GI Max Matrix is an USB gear indicator, the dimensions of the display are 47mm x 47mm and it is made form a bright RED led matrix..
On the back of the display there is the MICRO USB connector, perpendicular to the PCB. The USB cable to connect the display to the PC is not included but can be added for a small fee. Otherwise, any MICRO USB cable will work.

The configuration software allows you to:
Adjust the brightness of the display.
Simulate a shift light, making the display blink when the engine reaches a given number of RPM or a given RPM percentage (for the game that support it)
The front of the display is covered with a smoked 3mm acrylic layer that gives it a sleek dark appearance when not in use.

3-15 gg consegna
Disponibilità immediata
59,00 €
Aggiungi
GI Max Gear Indicator + Stand
Contamarce / Display
GI Max Gear Indicator + Stand

USB cable included

The GI Max is an USB gear indicator, similar to the GI Pro but much bigger: its display is 33mm by 47mm. The colour of the display is RED and the brightness can be adjusted using the software.
The connector is a MINI USB which is also used to power the board, so no external power supply is required.
If you require a more compact installation the GI Max is also available with special connectors soldered on the PCB and a matching USB cable that won’t tale space on the side of the display but on the back.

These connectors and USB cable are visible in the third and fourth picture.
As with the other SymProjects products, the most popular simulators are included. Check the full list.

Consegna stimata 20gg dall'ordine
Disponibilità immediata
89,00 €
Aggiungi
Thrustmaster T500 from SR Hardware + Pro Race Display
Contamarce / Display
Thrustmaster T500 from SR Hardware + Pro Race Display

USB cable included

Gear indicator at the center of the display
Two 6-digits displays that can be used for lap times (current, best and last lap time), RPM, speed, water/oil temperature and pressure. and more…
15 shift light LEDs.
6 more LEDs to use as warning indicators (flags, traction control, speed limiter, etc…)
20 inputs on the back of the display. Each input can accept a push button, a toggle switch or a rotary switch.
Each input has its own dedicated pair of pins, making connection much easier compare to the previous version of the Pro-Race.
The Pro-Race is detected by Windows as a Game Controller. This means the connected push buttons, toggle switches and rotary encoders can be used to control the simulator, like with any other game controller.
Disponibilità immediata
199,00 €
Aggiungi
Pro-Race 2 with enclosure
Contamarce / Display
Pro-Race 2 with enclosure

USB cable included

This is the same Pro-Race 2 display available here but with a black or red 3D printed enclosure.
For instructions on how to connect, configure and use the display, please use those for the display without the enclosure. The display are exactly the same.
Two of the twenty buttons that normally can be connected to back of the display, are available on the front panel of the enclosure. They are button 1 and button 3. They can be configured to change what data is displayed on the left and right displays of the Pro-Race.

Black o Red

consegna 15-20gg
Disponibilità immediata
129,00 €
Aggiungi
GI Max Gear Indicator with enclosure
Contamarce / Display
This gear indicator display is very similar to the popular GI Max gear indicator.

USB Cable included

The main differences are:

it comes mounted into a black or red 3D printed enclosure. The front panel is available in three different colors: black, red and yellow.
The original GI Max display doesn't have a shift light, but the function is simulated blinking the display fast when the shift point is reached. This version instead has a bright LED above the display that turns on when the in-game shift light is ON or the engine has reached a certain value of RPM.
The display that is mounted inside the enclosure is a KINGBRIGHT SA15-11SRWA. The display is high quality, bright and reliable. The brightness can be adjusted inside SimDash, in the GI Max configuration screen.
The display is attached to the computer with a MICRO USB cable. The cable can be added to the order from this page, but any will work, if you already have a spare one.

Consegna 15-20 gg
Disponibilità immediata
75,00 €
Aggiungi
Pannello 2 pulsanti a levetta
Tech4Sim
2 ON / OFF switches including 1 with aviation cap

2 alarm lights

1 push button START

Dimensions: 13.2 x 6.2 cm
Disponibilità immediata
24,00 €
Aggiungi
Pannello alluminio 1 pulsante Start ed interruttore a levetta
Tech4Sim
1 toggle switch panel

Aluminum starter panel

1 ON / OFF switch with aviation cap

1 alarm light

1 push button START
Disponibilità immediata
19,00 €
Aggiungi
Pannello di partenza in alluminio per competizione
Tech4Sim
Pannello di partenza in alluminio per competizione

Interruttore automatico di protezione

Dimensioni: 9,5 cm x 6,5 cm

Tutto il cablaggio è fornito!

Disponibilità immediata
32,00 €
Aggiungi
Pulsante Start
Tech4Sim
Red Push Button starter - 50 Amp ON/OFF

Red LCD backlight

Designed for racing - Perfect for motorsport
Disponibilità immediata
19,00 €
Aggiungi
Torna ai contenuti